升级最新版后进不去后台

1Panel
1

升级最新版后进不去后台，用命令行把 以下都取消了，还是进不去，返回ERR_CONNECTION_REFUSED
domain 取消 1Panel 访问域名绑定
entrance 取消 1Panel 安全入口
https 取消 1Panel https 方式登录
ips 取消 1Panel 授权 IP 限制

1 个赞
2

1pctl status 查看一下运行状态。
如果运行正常，netstat -ntlp 查看一下端口绑定情况。

3 
● 1panel.service - 1Panel, a modern open source linux panel
     Loaded: loaded (/etc/systemd/system/1panel.service; enabled; vendor preset: enabled)
     Active: active (running) since Thu 2024-04-18 20:34:18 CST; 11s ago
   Main PID: 1078382 (1panel)
      Tasks: 5 (limit: 9196)
     Memory: 343.2M
        CPU: 11.225s
     CGroup: /system.slice/1panel.service
             └─1078382 /usr/bin/1panel

Apr 18 20:34:18 VM-8-14-debian systemd[1]: Stopped 1Panel, a modern open source linux panel.
Apr 18 20:34:18 VM-8-14-debian systemd[1]: 1panel.service: Consumed 17.492s CPU time.
Apr 18 20:34:18 VM-8-14-debian systemd[1]: Started 1Panel, a modern open source linux panel.
Apr 18 20:34:18 VM-8-14-debian 1panel[1078382]: [2024-04-18 20:34:18] [INFO] init logger successfully
Apr 18 20:34:18 VM-8-14-debian 1panel[1078382]: [2024-04-18 20:34:18] [INFO] init monitor db successfully
Apr 18 20:34:18 VM-8-14-debian 1panel[1078382]: [2024-04-18 20:34:18] [INFO] init db successfully```
好像一直在重启
4

使用sudo netstat -ntlp后没看到有面板端口

5

1pctl restore 回滚，然后等一下新版本再更新

6

回滚后可以了，谢谢 :hand_with_index_finger_and_thumb_crossed:

7

我也遇到了,升级后用IP不能访问,后面吧监听改成IPV4就好了

1panel listen-ip ipv4
切换成功！已切换至监听 tcp4 [0.0.0.0]
1 个赞
8

我的回滚不了1panel version: v1.10.3-lts
mode: stable

9

什么问题，升级失败还是？

10

我遇到几次都是这样，啥情况哦
netstat -ntlp没面板端口
root@armbian:~# 1pctl restart
● 1panel.service - 1Panel, a modern open source linux panel
Loaded: loaded (/etc/systemd/system/1panel.service; enabled; preset: enabled)
Active: activating (auto-restart) (Result: signal) since Fri 2024-04-19 14:27:14 CST; 25ms ago
Process: 1412646 ExecStart=/usr/bin/1panel (code=killed, signal=SEGV)
Main PID: 1412646 (code=killed, signal=SEGV)
Tasks: 22 (limit: 1825)
Memory: 488.3M (peak: 730.0M)
CPU: 6ms
CGroup: /system.slice/1panel.service
├─ 386161 bash -c “docker logs b924c22d15881e61522096eaaea42f96d0081d7b9e4aa3396544bd15552903ac --tail 100 -f 2>&1”
├─ 386162 docker logs b924c22d15881e61522096eaaea42f96d0081d7b9e4aa3396544bd15552903ac --tail 100 -f
├─1390141 bash -c “docker logs 4317eb0e6bd2386c3341f8771bb7258da2fbb958590b880e1cd04cf58fb703d9 --tail 100 -f 2>&1”
├─1390142 docker logs 4317eb0e6bd2386c3341f8771bb7258da2fbb958590b880e1cd04cf58fb703d9 --tail 100 -f
├─1410743 bash -c “docker logs 5ef7bf2c76335ae50672a965c45900670cab032eaaad3efcda72f1e7ac8ccfec --tail 100 -f 2>&1”
└─1410744 docker logs 5ef7bf2c76335ae50672a965c45900670cab032eaaad3efcda72f1e7ac8ccfec --tail 100 -f

好像启动了面板

11

我是arm64/几个版本都是这个问题，升级就挂，用脚本升级又提示安装过

12

加一下我
image

14

升级LTS 10.5后一样也进不去了，获取不到端口，docker服务正常，然后看到有回滚命令，回滚一次到 LTS 10.3 还是看不见，再回滚一次到 LTS 10.2才能进去。。。。。。

15

我回滚无效，建议以后添加一种方式通过脚本升级，买了三折专业版，支持了，如果这些都搞不好，那就完蛋了